TCI Super StreetFighter Transmissions 211305

TCI's Super StreetFighter 211305 is the BOP-bellhousing version of this three-speed automatic, with a 4-inch tailshaft that suits shorter driveline setups than the Chevy-pattern unit built on the same architecture. It carries the same 875-horsepower rating and 2.48 first gear, with a manual/automatic valve body for either hands-off driving or manual gear selection. Before you order Match the BOP bolt pattern to your bellhousing, and size your driveshaft or yoke to the short 4-inch tailshaft and 30-spline slip-on output. This unit uses a non-variable-pitch converter setup, an aluminum case with a black finish, and a steel pan finished in chrome. It is not built for lockup, and the forward shift pattern applies across the automatic or manual side of the valve body. Condition and what is missing Budget separately for a converter, flexplate, controller, harness, and cooler, since none of those ride along with this case. This is a remanufactured transmission, sold individually rather than new. It ships without the speedometer driven gear or its housing; carry over your existing one if you are swapping in the same model, otherwise buy that piece separately along with fluid and a dipstick. What changes with the BOP pattern? The bellhousing bolt pattern and the shorter 4-inch tailshaft length, which affects what driveshaft and yoke you will need compared with a Chevy-pattern Super StreetFighter unit. Does it include a dipstick or fluid? No, both are separate purchases.