Honda 250HP | BF250DUCRA WT

The 30-inch-shaft BF250DUCRA WT draws 250 horsepower from Honda's four-stroke V6 design. This configuration checks in at 628 lbs. Remote, cable-driven steering is how this unit is controlled, rather than a tiller at the stern. This unit carries white cowling trim, a cosmetic pick that doesn't touch the specification. Honda builds the counter-rotating gearcase specifically for the twin-engine role, offsetting torque against a standard-rotation partner rather than changing anything about solo performance. Fuel injection (EFI) feeds this 3583cc, six-cylinder block rather than a carburetor. Confirming the pairing Check transom depth against this 30-inch figure before ordering, since mounting height has a real effect on both speed and cooling. This motor's rated full-throttle range is 5300-6300 rpm. Buyers shopping this horsepower are usually working from the boat's capacity plate rather than starting from scratch. What's included Beyond the counter-rotating gearcase and the Grand Prix White cowling, standard here is a charging coil and a cooling-flush point, with power trim and tilt; and the manual ships alongside five years of Honda's warranty. Factor in a propeller separately when you order this engine. Can I pair this with any Honda outboard? Only with a matching standard-rotation partner at the same horsepower; mixing output or model families isn't recommended. Is a propeller supplied with this motor? No, that's a separate purchase.