Evinrude E90HGL Outboard Motor

This used Evinrude E90HGL is a High Output V4 outboard, a noticeably larger engine than the three-cylinder motors that carry similar-looking Evinrude model codes elsewhere in this family. Engine specifics The block is a 60-degree V4 giving 105.4 cubic inches of displacement, a 2.00:1 primary gear ratio, and this engine winds out to between 5,500 and 6,000 rpm at the top of the throttle. The charging system is rated at 133 amps total, 50 net, well above the three-cylinder motors in this family. Weight and rigging At 390 lbs on a 20-inch shaft, this is a notably heavier unit, reflecting the larger V4 block. Remote steering with a tiller-accessory option rounds out the rigging, along with electric start, graphite-finish controls, and a Trac-1 unit for trim adjustments. Confirm exact horsepower and gearcase details with us before ordering. Why the extra weight and charging capacity A V4 adds a cylinder and overall mass versus a three-cylinder block, and the larger alternator reflects the higher electrical demand of the bigger engine and whatever accessories it runs on a larger boat. What's the charging output? 133 amps total, 50 net. Is this the same block as the three-cylinder 90-hp Evinrudes? No, it is a larger V4 engine despite the similar model-code naming used by the brand.