Evinrude E115DGL 115 HP Outboard Motor

The Evinrude E115DGL is a new 115 HP V4 E-TEC outboard finished with white control housings, built with Trac-1 power trim and tilt as standard equipment. Trim, color, and the numbers behind it Trac-1 power trim and tilt comes standard, with controls finished in white rather than the graphite seen on other models. The V4 block runs a 2.00:1 gear ratio, and bore and stroke measure 3.62 inches by 2.60 inches. Dry weight is 390 pounds. Rigging before you order Check that a 20-inch shaft matches your transom and that your boat's rigging can take tiller-accessory control operated remotely, instead of a handle mounted on the motor itself. The charging system is built around a 133-amp alternator, with 50 amps net dedicated for your gear. Full throttle tops out near 5,500 to 6,000 RPM, and starting is electric. Condition This E115DGL is new, not used or refurbished, and as a two-stroke E-TEC it carries no belts, camshafts, or exhaust valves that would otherwise need servicing down the line as the engine accumulates hours. Its white control housings match the finish used elsewhere in this family. Is power trim fitted? Yes, this build uses Trac-1 power trim and tilt. What's the shaft length? 20 inches. What's the dry weight? 390 pounds, before any fuel is added.