602/604 Crate Engine Complete Accessory Drive Kit

Built for GM's 602 and 604 crate engines, this accessory drive kit bundles a short, heavy-duty aluminum water pump, a matched 1:1 pulley set, and a power steering pump into one package sized for oval track racing use. The water pump uses 3/4" ultra duty bearings, a precision impeller, and casting designed for equal flow to both cylinder banks, and weighs 7-3/4 lbs. What's in the kit For the pulley side, you get a double groove crank pulley matched to a double groove water pump pulley, both cast aluminum, plus a set of heavy-duty belts measuring 30-5/8" x 3/8" that spin the pump at the same 1:1 speed as the crank. An aluminum lower pulley screw kit, a .090" thick aluminum lower pulley spacer, and a water pump shim kit rounding out the belt-alignment hardware, with the shim kit made up of a pair of 1/16" spacers plus a single 1/8" spacer. The kit also adds a steel power steering pump with an aluminum V-belt pulley and a black anodized mounting bracket sized for short water pumps. What to check before buying This kit fits a Small Block Chevy V8 built between '55 and '68 that takes the short-style water pump, whether that pump uses a 5/8" or a 3/4" shaft. The power steering pump uses an AN6 pressure fitting, and you'll need to supply your own AN8 or AN10 supply fitting along with a separate V-belt for the power steering pump, since neither ships in the box. On a 604 engine specifically, one timing cover bolt needs to be ground shorter so it clears the water pump. Common questions Does this fit any Small Block Chevy? It's sized for the short-style water pump used on 602/604 crate engines and similar SBC V8 applications. Do I need any extra parts? Yes, a power steering V-belt and an AN8 or AN10 supply fitting are needed but not included.