44 Inch Chevy Universal Straight Axle Kit, Semi-Elliptical/Gasser

This 44 inch straight axle kit gives a project running 1949-54 Chevy-style passenger car spindles a semi-elliptical, gasser-style front end, centered on a plain-steel tube axle with welded ends. Paired with flat plate steering arms, the correct tie rod for this width is 41.5 inches eye-to-eye. Kit contents Tube axle, welded ends, 0.250 inch wall Axle pads and U-bolts (pair) 1-3/4 inch spring shackles on nylon bushings Frame mounting brackets Two 32 inch, six-leaf springs Assembly hardware Before you order Spring pads slide along the axle so they can be welded in place to match your frame width, and a custom axle length is available if 44 inches is not the width your chassis needs. Spindles are not part of this kit, and it is not intended for off-road race use; welding is required throughout the install. Does this kit include spindles? No, spindles are sold separately. Is welding required? Yes, to set the spring pads and complete the mounting. Specifications KEY SPECS MFG. Part # 91639036-44 Brand Motors Front Suspension Type Straight Axle Suspension Height Adjustment Stock Height Control Arm Style Not Included Shock Type Not Included Spring Type Leaf Spring Finish Natural Bolt Pattern Not Applicable Rotor Diameter Not Included Spindle Style Chevy/GM Stock Dropped Spindles No Dropped Axle No Dropped Control Arms No Front Leaf Spring Style Semi-Elliptical Gasser Spindles Included No Steering Included No Welding Required Yes