2018 Mercury 6 Hp 6MH Outboard Motor

This new 2018 Mercury 6 HP 6MH outboard is a short-shaft, manually started tiller motor built around an integral fuel tank, light enough at 57 lbs to carry and mount without help. The 15-inch short shaft and front-mounted gear shift lever suit small jon boats, skiffs, and sailboats running it as an auxiliary. Engine details This single-cylinder engine was built in Japan for the 2018 model year under SKU 6MH-18, with a 2.32 x 1.77-inch bore and stroke and a 2.15:1 gear ratio. Full throttle runs 5000 to 6000 rpm through a carbureted fuel system fed by an internal 0.3-gallon (1.15-liter) tank, and the engine carries a saltwater rating. Handling and what ships with it Shift is forward-neutral-reverse through a front-mounted lever, steering is by tiller, and trim and tilt are both manual. An optional 12-volt, 4-amp, 50-watt alternator can be added later if you need to charge a battery, though it requires separate installation. The motor ships with its integral fuel tank, an owner's manual, mounting hardware, an aluminum propeller, Mercury four-stroke oil, and a tool kit, backed by Mercury's 3-year warranty. Does the fuel tank only hold 0.3 gallons? Yes, this model relies on its internal 0.3-gallon tank rather than a connection for a larger remote tank. Is this the short-shaft or long-shaft version? Short: this 6MH carries the 15-inch shaft, suited to boats with a lower transom. Mercury outboards Specifications MODEL 6MH MODEL YEAR 2018 SKU 6MH-18 WEIGHT 57.0000 MANUFACTURER Mercury COUNTRY OF MANUFACTURE Japan HORSEPOWER 6hp SHAFT LENGTH 15″ (Short) STEERING Tiller STARTING Manual TRIM & TILT Manual FUEL DELIVERY Carburetor FUEL TANK Internal CYLINDER(S) 1 DISPLACEMENT 7.5/123 BORE AND STROKE 2.32 x 1.77 FULL THROTTLE RPM RANGE 5000-6000 IGNITION SYSTEM CDI w/electric spark advance INDUCTION SCAVENGING OHV VALVES PER CYLINDER 2 FUEL TYPE CDI w/electric spark advance FUEL TANK / FUEL LINE 0.3 US Gallon (1.15 liter) OIL TYPE Mercury 4-Stroke Outboard Oil OIL CAPACITY 450 mL / 15 oz LUBRICATION Wet sump ALTERNATOR Optional 12V 50W 4A (installation required) COOLING SYSTEM Water-cooled w/thermostat SALTWATER RATED YES GEAR RATIO 2.15:1 GEAR SHIFT Forward-Neutral-Reverse (forward mounted shift lever) PROPELLER 7.7″ Diameter X 8.0″ Pitch 3-Blade Aluminum INTERNAL BATTERY No