2018 Evinrude E-TEC 30 HP E30DTSL Outboard Motor

The 2018 Evinrude E30DTSL is a second fully-equipped build in this 30 HP range: key-or-cord starting plus powered trim and tilt, on a 20-inch shaft, at a 187.39-pound dry weight. What the convenience package covers Bore and stroke run 2.992 by 2.5 inches across this two-cylinder E-TEC for 577 cc, geared at 2.15:1, with full throttle climbing from 5,500 to 6,000 RPM through tiller steering. Power trim and tilt sets running angle from a switch, useful on a boat that gets launched and retrieved often through a season. Fuel and electrical supply Fuel is 87-octane unleaded gasoline, and Evinrude/Johnson XD-100 is the oil this engine calls for, with the alternator reserving 15 of its 56 total amps net dedicated. Cooling is water-based, and the build carries a saltwater rating that covers both coastal runs and freshwater lakes. Condition This E30DTSL is new, not a used or refurbished unit, and it is effectively the twin of another power-trim build at this same shaft length and overall dry weight, differing only by model code and the lettering stamped on its cover. Does the trim need to be set by hand? No, this build uses power trim and tilt. How does it start? Electric, with a pull-cord backup. What's the dry weight? 187.39 pounds. Specifications MODEL E30DTSL MODEL YEAR 2018 SKU E30DTSL WEIGHT 187.39 lb MANUFACTURER Evinrude COUNTRY OF MANUFACTURE United States HORSEPOWER 30hp SHAFT LENGTH 20″ (Long) STEERING Tiller STARTING Electric and Rope TRIM & TILT Power Trim & Tilt FUEL DELIVERY E-TEC Direct Injection with stratified low RPM combustion mode FUEL TANK External CYLINDER(S) 2 DISPLACEMENT 577 cc (35.2 cubic inches) BORE AND STROKE 76 mm x 64 mm (2.992 x 2.5 inches) FULL THROTTLE RPM RANGE 5,500-6,000 RPM FUEL TYPE Unleaded Gasoline (87 octane) OIL TYPE Evinrude / Johnson XD-100 Oil OIL CAPACITY 1.7 qt (1.6 L) LUBRICATION Multi-Point Targeted Oiling ALTERNATOR 56 Amps Total / 15 Amps Net Dedicated COOLING SYSTEM Water Cooled SALTWATER RATED Yes GEAR RATIO 2.15:1 GEAR SHIFT Forward, Neutral, Reverse