2017 Evinrude 15 HP E15RG4 Outboard Motor

Among Evinrude's 2017 carbureted 15 hp outboards, the E15RG4 is the base rope-start setup, riding the shortest shaft in the family at 114.4 lbs. Steering is by tiller, and trim can be manual or power tilt, which keeps the rigging simple for owners who don't need a remote throttle. What's inside Bore measures 2.4 in, stroke 2.36 in, out of which this 2-cylinder carbureted engine draws 351 cc, or 21.4 cubic inches, of displacement. At full throttle this block turns 5000 to 6000 rpm on a 2.15:1 final gear, and cooling is by water rather than air. How it's built Shifting runs forward, neutral, and reverse off a front-mounted lever, with a carrying handle and a rear holding grip for moving the motor by hand. A single carburetor supplies fuel, routed through the prop exhaust for a quieter note, drawing from a 3.1-gallon external tank. Service relies on Evinrude/Johnson's 5W40 Ultra 4-Stroke oil, 32 ounces per fill, paired with 87-octane gas. Coverage Evinrude backs this motor for 3 years on a non-declining basis, and it's certified to EPA 2013 and CARB 3-Star emissions standards. Can this run on a tiller alone, no electric start? Yes, this build starts by rope and has no onboard alternator. How much does it weigh? 114.4 lbs, the lightest version of this 15 hp family. Can the fuel tank be swapped for a larger one? The listing covers the motor as rigged, with its 3.1-gallon external tank; confirm fitment with us before substituting a different tank.